How to use the shearing machine correctly

1658732248 How to use the shearing machine correctly
  1. Before working, carefully check whether all parts of the shearing machine are normal, whether the electrical equipment is in good condition, and whether the lubrication system is smooth;
  2. Do not operate the shearing machine by one person alone. 2-3 people should coordinate the feeding, control of dimensional accuracy and reclaiming, etc., and make sure that one person is under the unified command.
  3. Adjust the scissors gap of the shearing machine according to the specified thickness of the shearing plate. It is not allowed to cut 2 sheets of different specifications and materials at the same time; it is not allowed to cut by stacking. The sheared sheet requires a flat surface, and it is not allowed to cut narrower sheets that cannot be compressed.
  4. The belts, flywheels, gears, shafts and other moving parts of the shearing machine must be equipped with protective covers.
  5. The feeding finger of the shearing machine operator should keep a distance of less than 200mm away from the scissors mouth, and leave the pressing device. The protective fence placed on the shear trigger cannot block the operator’s eyes from seeing the cutting part. The waste generated after the operation has edges and corners, and the operator should clean it up in time to prevent being stabbed and cut.
  6. The flywheel, gear, shaft, tape and other moving parts of the shearing machine should be equipped with protective covers.
  7. Place a fence to prevent the operator’s hand from entering the scissors drop area. It is strictly forbidden to pick up scraps on the ground during work, so as not to be injured by falling workpieces.
  8. It is not allowed to cut quenched materials, and it is never allowed to cut beyond the working capacity of the shearing machine.

Get Free Quote

Request a Auote