durable Press brake machine

DELEM DA66T 6+1 axis CNC Press Brake Electric-Hydra Type

DELEM DA66T 6+1 axis CNC Press Brake Electric-Hydra Type

DELEM DA66T 6+1 axis CNC Press Brake Electric-Hydra Type

High performance NC press brake main features:     


1.Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.

2.Hydraulic synchronised positive stop design,and by DELEM programmable controller assuring accurate repeatability &ease of use.

3.Integrated hydraulic system(Bosch-Rexroth form Germany)allowing rapid approach switching automatically to slow bend.

4.Servo drive with DA66T System operated back gauge with quality support fingers also with vertical adjustment

5.Inch, single mode being designed for the machine and servo and maintain time can be controlled by the server Driver.

6.the distance of upper slide moving down is adjusted by grating ruler with high precision

7.Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety.

Standard Equipment:        


1. Delem DA66T CNC control System

2. Powered Depth Y1-axis&Y2-axis,X-axis&Z1-axis&Z2-axis&R-axis&V-axis&Back gauge X-axis (X-axis 0.01mm/Y1/Y2X/Z1,Z2-axis 0.01mm)

3. Servo motor control block

4. HIWIN Ball screws & Polished rod with 0,01mm accuracy.

5. Plate Support Arms

6. Germany Bosch-Rexroth Hydraulic

7. Germany EMB Tubing connector

8. Germany Siemens Main Motor

9. Tele mecanique/Schneider Electrics

10.Hydraulic &Electrical overload protection

11.Top and Bottom Tooling(86°,R0.6mm)

12.Safety Standards(2006/42/EC):

High performance NC press brake safety equipment:    


1.EN 12622:2009 + A1:2013          2.EN ISO 12100:2010      3.EN 60204-1:2006+A1:2009

● Front finger protection device ( safety light curtain )

● South Korea KACON pedal switch ( 4 security grade )

● Back metal safeguard, CE standard

● Safety relay monitors completed with pedal switch, safety protection devices

● Safety standard(2006/42/EC)

Delem DA58T CNC Control system:                                                              

The new generation of DA-Touch controllers offers greater efficiency in the programming, operation and control of today’s press brakes. high performance NC press brake Ease of use combined with state-of-the-art technology for increased productivity.
The touch screengives access to the proven Delem user-interface and enables direct navigationbetween programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application.
The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.
Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever.

1. 3D visualisation in simulation and production

2. 17″ high resolution colour TFT

3. Full Windows application suite

4. Delem Modusys compatibility (module scalability and adaptivity)

5. USB, peripheral interfacing

6. User specific application support within the controllers multitasking environment

7. Sensor bending & correction interface

The CNC Press Brake Electric-Hydra Type, a state-of-the-art bending machine designed to meet the highest standards of precision and efficiency. This innovative piece of equipment has been engineered with cutting-edge technology and features an advanced hydraulic system, making it an ideal solution for a wide range of industrial applications.

The CNC Press Brake Electric-Hydra Type is designed to provide outstanding accuracy and versatility in metal bending operations. With a maximum bending angle of 180 degrees and a high bending speed of up to 25 mm/sec, this machine is capable of delivering precise and consistent results, even when working with complex shapes and materials. The CNC-controlled backgauge and ram depth ensure excellent repeatability and accuracy, while the programmable bend sequence allows for easy setup and operation.

One of the standout features of the CNC Press Brake Electric-Hydra Type is its electric-hydraulic system. This innovative technology combines the precision and control of electric drives with the power and reliability of hydraulic systems. The result is a machine that delivers excellent bending performance, energy efficiency, and low noise levels. The electric-hydraulic system also offers faster response times and reduced maintenance requirements, making it an ideal choice for high-volume production environments.

Another key advantage of the CNC Press Brake Electric-Hydra Type is its user-friendly interface. The machine is equipped with an intuitive touchscreen control panel that allows operators to easily input and adjust parameters such as bending angle, backgauge position, and ram depth. The control system also includes advanced features such as automatic calculation of bend allowance and springback compensation, which help to ensure accurate and consistent results.

The CNC Press Brake Electric-Hydra Type is built to withstand the demands of heavy-duty industrial use. The machine features a sturdy frame and high-quality components that ensure long-lasting performance and reliability. The hydraulic system is designed to minimize energy consumption and reduce wear and tear, while the electric drives offer excellent precision and control. The machine is also equipped with safety features such as a light curtain, emergency stop buttons, and a safety interlock switch, which help to ensure safe and efficient operation.

In conclusion, the CNC Press Brake Electric-Hydra Type is a cutting-edge bending machine that offers outstanding performance, versatility, and reliability. Its advanced technology, electric-hydraulic system, and user-friendly interface make it an ideal solution for a wide range of industrial applications. Whether you are working with simple or complex shapes, thin or thick materials, this machine is sure to deliver excellent results every time. So if you are looking for a top-quality press brake that can help you take your metal bending operations to the next level, look no further than the CNC Press Brake Electric-Hydra Type.

High performance NC press brake specifications:                                                                         

DELEM DA66T 6+1 axis CNC Press Brake Electric-Hydra Type

High performance NC press brake Main Configuration:                                                                   

1. Main configuration list
1- CNC Control system ■DA66T System
2- Electrical components Schneider Electrical from French
3- Main Motor Siemens from Germany
4- BackGauge & RAMDrive Inverter from Taiwan delta Accurate positioning control
5- Ball screw/ Liner guide HOLLAND DELEM
6- Foot switch KACON from South Korea
7- Travel switch Schneider Electrical from French
8- Hydraulic System Bosch-Rexroth form Germany
9- Hydraulic Pump Bosch-Rexroth form Germany Optional
10- Tubing connector EMB form Germany Brand
11- ManualCrowning system Pls inquire us Optional
12- Three color Alarm Lamp ■Yes      □No
2.Safety Configuration (optional)
1- Warning of high oil temperature ■Yes   □No
2- High oil pressure protection ■Yes   □No
3- Motor overload protection ■Yes   □No
4- Laser Safety Protection □Yes     ■No
5- Left & Right side protection ■Yes  □No Fixed type(metal)
6- Electricity leakage protection ■Yes  □No
7- Safety Relay ■Yes  □No
8- Monitoring and Redundant valves ■Yes  □No
9- Safety standards ■CE    □CSA    □NR-12    □OSHA

request a quote