GNVP Series CNC Veritical Grooving Machine
–The body is all steel welded, annealed and heat treated to remove the internal stress, with very high strength
–Adopt Abel CNC system, mature technology and reliable products
–All the electrical appliances use the original products of Schneider, one of the world’s three largest electrical appliance manufacturers, to ensure the service life and stability of the circuit.
–The hydraulic control system of Taiwan Oil Research Institute, the pressing and releasing of the pressing plate and the jaw is fully automatic, and the pressure is stable and reliable.
–Servo motor feeding, high accuracy and reliability, up to 0.01mm.
–Servo motor controls tool rest and feeding device for precise planing and positioning.
–Using the touch screen, the command input is quick and clear.
–Change the traditional nut and screw drive mode to imported fine alloy steel rack and pinion drive, which has lower noise, easier maintenance, lower failure rate and smoother operation.
–The automatic spray method cools the tool and improves the service life of the tool.
|CNC system||Japan Abel|
|Hydraulic control system||Taiwan vane pump solenoid valve|
|Cylinder sealing element||Japan NOK|
|Single/double pole air switch||Korea LS|
|AC contactor, thermal relay||Schneider, France|
|Circuit breaker, button||Schneider, France|
|Miniature relay||Schneider, France|
|White steel knife||Yishengbai|
|Linear guide rail||Taiwan HIWIN|
|Machine tool cable||Germany imported igus|
|Machining Capacity||Plate||Material||Stainless steel, ordinary iron plate, copper, etc.|
|Minimum edge||White steel knife 8mm alloy knife 10mm）|
|CNC Specifics||Control Method||4 axes CNC controlled X, Y, Z|
|Display||15-inch high-definition LCD touch screen|
|Storage Capacity||99 groups can be stored, and 999 small V ports can be slotted in one group|
|Transfer Method||Ball screw/linear guide/rack and pinion|
|Machining Sped||X Axis Forward-Cutting||4-38m/min（Stepless speed regulation）|
|X Axis Backward||4-120m/min|
|Tool holder (Y1 axis) and end pressing material (Y2 axis)||0.5m/min|
|Feeding (Z-axis) Z-Axis||6m/min|
|Machining Precision||Front and rear of planer head (X-axis)||0.5mm|
|Tool holder up and down (Y-axis)||0.01|
|Pipe position width (Z axis)||0.02mm|
|Driving Mode||Planer head (X-axis)||5KW Mitsubishi Servo Motor|
|Tool holder up and down movement (Y-axis)||0.4KW Mitsubishi Servo Motor|
|Feeding (Z axis)||1KW Mitsubishi Servo Motor|
|Clamping Device||Hydraulic System||1.5Kw/8L/10Mpa|