rolling machine

BEKE 4-Rollers Hydraulic Plate Rolling Machine

BEKE 4-Rollers Hydraulic Plate Rolling Machine

3 roller rolling machine 04

 

3 roller rolling machine 05

 

3 roller rolling machine 06

 

Main Characteristics

This rolling machine is three roll symmetrical rolling plate equipment. Mainly used for process in cold (S 245Mpa) within the sheet roll into all the cylinders with different diameters, widely used in boilers, chemical, mining, construction, shipbuilding and other machinery industry.

A)This machine is a symmetrical bending plate machine. Through the lower pressure of the upper roller and the upper and lower rollers roll again each other, the roll forming of the cylindrical workpiece is finished.

B)The realization of the upper roller lifting movement is that the auxiliary motor drives the worm and worm wheel mechanism under the left and right roller bearing seats to move through the auxiliary motor, so that the wire rotator fixed on the worm wheel can make the lifting screw move up and down.

C)This machine is composed of two parts, the working part and the transmission part on the whole chassis of the welding. The working part consists of a left and right roller bearing seat, an upper roll, two lower rolls, a worm gear pair and some auxiliary parts. The lower roller is an active roller, and the upper roller can be adjusted along the height direction. The drive part is composed of the main motor, the main deceleration motor and other auxiliary parts.

D)The transmission of the roller is realized by the main motor through the main reducer. The output shaft of the main reducer is transmitted to the two lower roller through a set of gears. The transformation of the transmission direction of the roller is achieved by the commutation of the main motor.

E)Unloading board device is used when the cylinder after winding, before disengaging the left bearing can tilt the bearing seat, and on the rise in the first place, and end with the balance pull pull on the roller, and then tilting the bearing seat pin out, overturned tilting bearing, rolling workpiece can be completed from one end of the upper roller.

F)The main components are: three roller first heat treatment tempering HB240-280, second heat treatment surface quenching HRC48-52, bracket for welding parts, after welding processing, chassis for welding parts, lifting screw and worm 45 steel forgings.

G)The electric part, with famous brand and high quality products, is stable in movement, long life, safe and reliable, and easy to operate.

Technical Details

Model Max.Bending thickness(mm) Max. Bending width(mm) Yield limit(Mpa) Coiling Speed(m/min) Top roller diameter(mm) Bottom roller diameter(mm) Central distance(mm) Main power(Kw)
W11-4×1500 4 1500 245 5 150 140 200 4
W11-4×2000 4 2000 245 5 160 150 220 4
W11-6×1500 6 1500 245 5 160 150 220 4
W11-6×2000 6 2000 245 5 170 160 220 5.5
W11-6×2500 6 2500 245 4.5 180 170 250 5.5
W11-8×1500 8 1500 245 5 170 160 220 5.5
W11-8×2000 8 2000 245 4.5 180 170 250 5.5
W11-8×2500 8 2500 245 4.5 240 180 280 7.5
W11-12×2000 12 2000 245 4.5 240 180 280 7.5
W11-12×2500 12 2500 245 4.5 260 220 320 11
W11-12×3000 12 3000 245 4 280 240 360 11
W11-16×2000 16 2000 245 4.5 260 220 320 11
W11-16×2500 16 2500 245 4 280 240 360 11
W11-16×3000 16 3000 245 4 340 270 440 15
W11-20×2000 20 2000 245 4 280 240 360 11
W11-20×2500 20 2500 245 4 340 270 440 15
W11-25×2000 25 2000 245 4 340 270 440 15
W11-25×2500 25 2500 245 4 370 280 480 22
W11-30×2000 30 2000 245 4 370 280 480 22
W11-30×2500 30 2500 245 4 420 360 550 30
W11-30×3000 30 3000 245 4 450 390 600 30
W11-40×2500 40 2500 245 4 500 400 600 37

Get Free Quote

Request a Auote